2013-05-09At Your Service Plumbing Company
12081 W Alameda Pkwy # 425
Telephone: + 303 351 5881Telephone: + 303 986 5325
Rating: 10 out of 10 based on 4 ratings
Main Office Line
Investing in Professional Plumbing Repair and Maintenance is Smart
Copyright (c) 2010 Gerry Stringer
Whether you have one bathroom or a whole host of personal and guest bathrooms, they need to be in proper working order every day to ensure no lifestyle interruptions. From the first shower of the day through the last teeth brushing at night, every member of the household uses the plumbing fixtures daily. There are few rooms in a home more essential than the bathroom.
Fixtures require periodic maintenance to guarantee they are performing at the level required. Because the bathroom is a high traffic area, fixtures wear out over time due to repeated use. Those nagging drips or running toilets can consume hundreds of gallons of water every day, plus more serious problems – like pipes leaking into the floors or walls – often go undetected until they have created thousands of dollars in damage.
Bathroom plumbing, especially in the newer, modern homes with multiple fixtures and specialty fixtures like spas and whirlpool tubs, is a very complicated system that often requires inspection and work done by a professional plumber. Indeed, many professional plumbers specializing in bathroom fixtures report they often get called in after a homeowner has hit a snag on that Do-It-Yourself fix-it project.
Since bathrooms get such a workout, any homeowner wishing to forestall problems from happening is advised to have the plumbing fixtures inspected once every two years to ensure all the connections are water tight, the fixtures are working properly, and there are no telltale signs of water damage or the early stages of corrosion from hard water. Detecting and correcting a problem as early as possible is less expensive in terms of both money and downtime and a complete inspection also offers peace of mind because problems are under control before they escalate into a plumbing catastrophe.
Plumbing professionals are, however, also experts at bathroom plumbing repair – including fixing those nagging drips and leaks or, if the need arises, emergency repairs when a pipe bursts or a fixture fails.
Denver bathroom plumbing repair experts report that the most typical bathroom plumbing repair calls are:
– Toilets – leaking or constantly running toilets can waste as much as 200 gallons of water a day, an unnecessary expense that any professional plumber can easily fix. Toilets leaking around the base indicate that water is seeping into the floor, and into the ceiling of the room below, and can lead to structural damage. Professional plumbers can repair the toilet mechanism or replace the toilet with a new one that matches the bathroom color and décor.
– Faucets – faucets get so much use that drips and leaks are a normal occurrence. Amazingly, more than 3,100 gallons of water every year are wasted by a faucet dripping once per second. For the most part, faucet repairs involve the simple replacement of gaskets or washers, however fixtures do wear out and periodically require replacement. Most professional plumbers have access to a wide array of bathroom faucet fixtures to match the déor a dream faucet upgrade.
– Drains – slow and clogged drains are commonplace, and remedies such as pipe snakes or retail chemical drain cleaners, in the hands of a homeowner, often do more harm than good. A professional plumber can quickly diagnose and repair the problem with the proper tools – and make sure there is no bigger problem just waiting to happen.
– Water pressure – improper water pressure, either too high or too low, can not only be a hassle, it can indicate a much more pressing issue impacting the whole house. Before it escalates into an expensive proposition, a professional plumber can determine the source of the problem and quickly fix it.
– Hot water – hot water, of course, is at the heart of a great bathroom, and many people report issues with water temperature. The problem could be as small as a malfunctioning single-lever faucet not mixing the hot and cold properly, or it could be a corrosive block in the hot water pipe, or it could, of course, be an inadequate water heater of a water heater on the blink. A professional plumber can figure out the proper course of action quickly and could save the expense of a new water heater or a potential pipe problem.
When done on a regular basis and when small problems first arise, professional bathroom plumbing maintenance and bathroom plumbing repair can be among the most money-saving undertakings a homeowner can do to maintain the household lifestyle. Check a plumber’s references and experience to insure the selected plumber has expertise in the type of fixtures and systems within the home, however rest assured that the cost of a professional plumber will be an investment against an emergency and money well spent.
Bathroom Fixtures Denver,Bathroom Fixtures Denver Co,Bathroom Vanities in Denver Colorado,Granite Tile Denver,Granite Tile Denver Colorado
About the Author
Gerry Stringer of Denver owns several rental homes and is in the market of buying and selling real estate. Owning a variety of homes inevitably includes plumbing problems so for all plumbing maintenance and plumbing repair in Denver, he calls expert plumber Ben Franklin Plumbing who has had more than 30 years of experience in bathroom plumbing repair and bathroom remodeling.
Rating: 10 out of 10 based on 4 ratings
Main Office Line
The toilet is one of the most typical locations where plumbing repairs happen. Most of the time you can deal with them on your own rather than calling a plumbing contractor. Before you try and to tackle this yourself, you first need to have some basic fundamentals of how the toilet operates.
by osseous under CC BY with wpseopix.com
What To Do When You Have Flushing Difficulties
At first, verify whether or not the water supply is turned on. Troubles with flushing generally happen when there’s some type of an object or an obstacles in the flush tank blocking the flow of water. Replacing the valve will most most likely resolve it. You don’t even have to get a plumber for that, as the valve wears out over time and it will need to have a replacement. Also attempt tightening the take care of, as it could have gotten loose and the issue will most likely be solved.
Dealing With Overflow
Your flush tank might overflow if a lever or a flush ball is worn out. An indication of this issue is the flow of water even immediately after you let go of the flush deal with or you hear sounds right after you flush. And one more one would be damaged refill valve. Checking the problem of it will let you know if you ought to replace it or just clean it up.
At times the difficulty could be in the toilet itself. See if there are loose bolts and tighten them up, and you might have just fixed the problem. Now if you get a crack in the tank, then it desires to be replaced.
What To Do With Non-Stop Water Flow
The greatest way to fix this is to move the float ball, as it’s possibly sitting a little to high. Altering it’s position may well resolve it. If your toilet comes with water intake assembly, adjusting the clip attached to the rod will lower the water level.
Water Leaks As a result of Handle And Flush Valve
If uncover water leaks coming from the manage, then one particular answer may well be to reposition the flush ball once more. As the flush ball may well be sitting to high causing water leaks to take place. If however you uncover a crack on the flush, that may as effectively cause the discharge of water. The only answer for this is replacement of the valve.
Moisture And Condensation Around The Tank
This is rather typical in the cold climate. What you can do is place some insulation around the tank, as it will lower the chance of moisture. You can get it at a hardware store. And it’s quite straightforward to install.
These tips can assist you stay away from dealing with costly toilet repairs, as quiet usually they can be fixed by oneself.
How to Repair A Leaky Toilet,toilet leaking Problems,Leaking Toilet Shut Off Valve,Leaky Toilet Tank,toilet leaking at Base,toilet leaking on Floor
That’s where Ben Radant comes in from Midstate Plumbing, servicing the South Saint Paul MN area as a local and trusted plumber.
Your house contains an intricate network of pipes and tubes that have been installed within the walls, under the flooring, and sometimes even behind electrical circuits. This intricate network of pipes is responsible for the fresh water in your drinking water, bathing and other uses, while the drainage system carries dirty water out of your home to your local sewage treatment center. There are complicated designs and piping that is set up and working inside your house, and only an expert can understand them and carry out major repairs, so don’t create an even bigger problem by trying to solve your plumbing repairs by yourself. Ben can do them for you.
Though fixing a leaky faucet is an easy task and can be accomplished by almost anyone with a few tools and the right instructions, you should never try to fix major plumbing issues by yourself as they may lead to unseen and unexpected water disasters that can severely damage your home.
Plumbing issues cannot always be fixed by a trial and error method. For instance, if you have a clogged drain, you might try to stick a stiff wire into it and pour a whole lot of chemicals to clear the blockage. While sticking the wire you could damage the pipe and cause it to crack. You might even puncture an old pipe, which will really cause a major leak and problem.
Water and chemicals could seep out of the crack and fall on other piping fixtures such as gas or drinking water pipes.
The over the counter chemicals and liquids are quite strong, and they can steadily eat into these pipes and cause the sewage water to leak into your drinking water supply (you DON’T want that to happen EVER!).
Your gas pipes could also get damaged and cause a leakage which could be dangerous.
So the foremost reason to avoid fixing plumbing problems all by yourself is your own and your family’s safety. Leave this work to an expert.
Plumbers in South Saint Paul have the experience and the right equipment required to deal with these pipes and protect themselves from exposure.
Ben Radant from Midstate Plumbing is an experienced plumber servicing the South Saint Paul, MN greater area and is a Professional plumber trained to look for potential hazards before starting work and will do his best to protect your property.
Ben’s Grandfather was a plumber. His uncles too were a part of the family business. Ben attended a trade school for Carpentry and Plumbing and then took the St. Paul Technical College Apprenticeship Program for 5 years. During that time he developed his dedication and love for plumbing. He worked in the field on plumbing jobs in the daytime and continued his schooling in the evenings.
When Ben finished the Apprenticeship Program he joined the family business. In 2002 Ben decided to follow in his Grandfather’s footsteps and start up his own plumbing business. Ben’s new business became a way of life for him. He enjoyed meeting people and building relationships with his customers.
Ben’s company primarily focused on new construction and remodeling jobs. But in 2008 with the effects of the decrease in economy all around him, Ben decided to open up his business to the residential area and develop a service-based division of the company. He focused on the everyday needs of residential customers.
One of Ben’s longtime customers wrote in a thank you card, “after so many years we continue to be impressed with your workmanship and craftsmanship and attention to detail. We look forward to our ongoing friendship and business relationship.”
Ben’s company focuses on Residential Service, New Construction and Remodeling. The benefits that customers enjoy are: friendliness from start to finish, cleanliness from the moment they step foot in a customer’s home, customers are happy and satisfied with the job before Ben leaves.
Ben says “I like this business because I get to talk with my customers and be a part of their every day lives.” Ben believes that “it’s all about the customer”.
Plumbers in South Saint Paul MN, like Midstate Plumbing will make sure that your water supply and drainage systems remain in good shape and whenever you face a problem Ben will be there quickly to assist you. You’ll always have a quick local professional to rely on for the best service.
Many people assume laminate cabinets can’t be refinished, but this is far from the truth! There is no need to replace laminate cabinets because they are old or outdated. Instead, you can simply refinish them! Instantly brighten, modernize, and alter the look of your kitchen’s laminate cabinetry all within your budget. It is important to review the correct process for laminate cabinet refinishing in order to achieve the best possible results. For those uncomfortable with do-it-yourself handy work, there’s no need to worry; you can hire a professional contractor and still remain within budget! Continue reading for a brief guideline to refinishing laminate kitchen cabinets, and who to call for professional general contractor work for kitchen remodeling in your town!
Laminate Kitchen Cabinets
If you are determined to refinish your kitchen laminate cabinets on your own, then good for you! Take a look at the guide below to learn some of the major components and key points for these particular projects. Be sure to prepare by first gathering all the necessary supplies and tools to get the job done right. These include:
Paint and Paint Primer (Water-Based)
Sandpaper (240 & 150 Grit Sheets)
Old Bed Sheets or Drop Cloths
For an even more updated look, you can purchase and install new, more modern-looking cabinet handles. These are available for a variety of designs and prices at any hardware or home store. If any laminate is peeling or cracking, it will need to be replaced entirely. Do not proceed to refinish peeling or cracked laminate cabinetry. However, if it is only slightly peeling in one corner or so, you can simply sand the exposed area behind the laminate, and then re-glue it using a water-proof adhesive. Use masking tape to hold it in place while it dries. This works best for small areas and corners. Once you have accumulated all the tools and supplies you need, you are ready to get started.
First clean all of the cabinets. Dust them with the microfiber cloth to remove solids, and then follow with a thorough wipe down using the disinfectant spray. This provides stronger primer adhesion and ensures a cleaner smoother finish.
Using the screwdriver, remove each cabinet face and its handle while keeping track of where each one goes. Use the permanent marker to label each one so you will remember where to replace it later.
Place the cabinet faces on the drop cloths, making sure the edges remain exposed and accessible. Be sure the drop cloths cover enough surface area to protect the surrounding environment from paint.
Use the painter’s tape to line the inside edges of the cabinet faces to prevent paint drips. Take your time on this step to ensure accuracy.
Use the 240 grit sandpaper sheets to manually sand the cabinet faces. You may choose to use a handheld portable sander if you are familiar with its operation. Just be sure to not over-sand.
After sanding, use your microfiber cloth to wipe away the residual dust and sanding debris. Do this thoroughly and remove as much dust as possible.
Using your foam roller, apply a coat of water-based paint primer to each cabinet face. Allow this to dry completely, usually 8 to 12 hours depending on the brand.
Once the primer is applied and has dried completely, sand each cabinet face again using the 150 grit sandpaper. Remove excess sanding dust with your microfiber cloth afterwards.
Do steps 7 and 8 again.
Once both coats of primer are applied and have dried, it is time to apply your water-based paint of choice using your second foam roller. Be sure to use v-strokes during application to promote even paint marks and distribution.
Repeat step 10.
Allow the cabinets to dry for at least 72 hours before reattaching hardware and reassembling them in their rightful place. This ensures that the paint has dried and hardened completely.
Not a DIY Kind of Person? No Problem!
You may choose to hire a professional painting contractor instead of tackling this project on our own. If you are not familiar with handy work, and have never painted before, it may be the wisest choice. And you can still remain within a cost-effective budget when you hire professionals for the job.
When a pipe breaks or another piece of plumbing malfunctions, our first instinct is getting the trouble under control as quickly as practical. The longer this kind of an issue continues, the more challenging it will be to repair. Not only will the problem be more difficult to repair, if left unaddressed, the situation could possibly cause hundreds to thousands of dollars in property losses As time is of the essence in the middle of a plumbing emergency, we feel pressured to make a repair determination as quickly as practical, without granting ourselves time to think over our options entirely.
The reality is you actually do have time to make a well-informed determination about the most suitable way to deal with your plumbing predicament. There are some basic, but helpful preventive steps that you can easily take to protect yourself and your residence from damages and loss. Learning what to do and what to look for are crucial to getting the sort of solution you’d look for from a repair professional.
The first and quite possibly biggest step that you can take to minimize damage is to turn off the water supply at the origin of the problem. If your issue is a broken pipe spitting water, you can close the water supply to the home utilizing the shut off valve. This valve is usually placed somewhere in your yard, under a rectangular shaped cover that also contains your water meter. If you have a more localized situation, like a toilet or water heater that is leaking, you can close the water supply to these independently. A toilet shut off valve is generally an oval shaped handgrip, situated alongside the base of the toilet. A water heater’s shut off valve is positioned next to the water pipes.
Immediately after you’ve turned off water to the trouble, tracking down a professional plumber is the subsequent step. You might possibly like to make a quick call to a few friends or relatives to see if they can suggest someone to you.
After you have a few names, give them a call and get quotes on the repair in question. It’s a great strategy to inquire about warranties on their repair work in addition to satisfaction guarantees. If you have enough time, it is also wise to investigate any contractors you may choose by means of the Better Business Bureau.
Understand that many plumbers require a substantial premium for working after hours and on holidays. A few charge mileage and additional fees on top of their per hour fee. Inquiring about all this ahead of time can assist to prevent costly surprises when the bill comes.
Naturally, in an ideal world, you’ll already have the names of a couple of trusted repair specialists that you can get in touch with before an emergency transpires. A bit of foresight will go a long way in these things. After all, it’s your house and you don’t want to trust it to just anybody – particularly when botched fixes can cost a lot of hard earned cash and cause a lot of distress down the road.
Emergency Plumbing Repair Denver are experts when it comes to emergency plumbing repairs.
Read more on GoArticles.com …
It might seem obvious to some, but there are times in life when the plumbing in a home gets bad, and it’s important to call in a professional to get a proper fix. It’s important to know when to call an emergency plumber, especially when there seems to be something that you can’t control happening. Most people aren’t sure that there is anything wrong in the home, but when a pipe bursts and flooding starts, scrambling to find a phone number for a plumbing service that will come over and fix things at any given hour is very difficult. Consider the following tips to help you get help no matter what happens and when.
First and foremost, don’t wait for something bad to happen to know who to call. Make sure that you have a phone number for an emergency service just in case. If you plan way ahead of time, you will be able to avoid major damage from problems that will arise in the middle of the night. If you’re not sure where to find a reputable service, you will be even more lost when water is filling up your basement or pouring out of your dishwasher or fixtures. The best thing to look for is for an emergency service that is available 24 hours and is local to your community. You want someone that is close because if you call someone and they are far, you will have to deal with the problem until they arrive.
Local plumbers are the best to call, but you have to ensure that they are available 24 hours a day and they are licensed and insured. You want to ensure that if anything happens in your home that you are not liable. Not only that, you’ll need to ensure that you are hiring someone that has a high reputation for customer service.
These are things that you will forget when you’re panicking and something is going wrong in your home, so make sure you plan ahead.
If you’re not sure when to call, don’t stress, call immediately after you realize that there’s an issue with your home’s water, or drains. Whether there is water backing up, pouring out of pipes, or you’re dealing with issues related to sewage, call someone immediately and explain to them the issue. They will most likely be able to get to you within a half an hour or less, depending on how far away they are.
No one wants to think about what is going to happen in the home in terms of emergency, and proper maintenance can keep problems at bay, but there are moments in life that you can’t stop, and plumbing issues is one of them. Eventually pipes fail, corrode, and back up, which is why it’s absolutely imperative that you call an emergency plumber when the time is right. The best time to call is immediately after you figure out an issue is occurring. Don’t hesitate and don’t wait for the last minute to try and find someone to help. Plan ahead, and be ready for anything, that way you save your home from severe damage.
6 gallons or less per flush.
Taking Care Of Your Bathtub
By Scott Rodgers
At the end of a hard day, particularly in the middle of winter, chances are you’ll want to finish the day with a wonderful warm bath. Nowadays it is rather a luxury because baths use lots of water and you are more than likely saving it up for a particular occasion and taking a shower most other days.But on the night you have decided to have a bath, the last thing you have is to find a problem with your bath. Nonetheless, these things happen and it’s best to look over your bathtub every so frequently so you can make any repairs before you have got a major problem and water is leaking everywhere. If you have a fibreglass bathtub, you’ll find it’s usually covered in a polyester gelcoat. The great news is that you can simply enough purchase a fix kit for gel coats from your plumbing or local hardware store. If you follow the manufacturer’s instructions with care, you will be able to complete the repairs yourself.You may have a scratch on your acrylic bathtub. There is a chance that you adore your bathtub and you won’t want to leave the scratch looking ugly in the bathroom. The easy solution is to use a car polish and apply carefully just as you would on a car, without using something abrasive.Small chips on your acrylic bathtub can be fixed using a two-part car repair filler. Mix the filler as per the guidelines for applying to a car and mix in a little acrylic paint so that it is the same as the color of your bathtub. Apply the filler and when it hardens, rub it down with fine wet and dry sandpaper. It is important to keep it wet as you sand. If you have a large chip in your acrylic bathtub, it’s best that you call a specialist. These aren’t easy to fix all by yourself.If you have an enamel bathtub, you’ll find that the surface is like glass. It is generally very hard, but if it’s hit, you’ll discover it is possible to chip. For a small chip you can use nail polish. If the chip is bigger, you can use an epoxy resin repair kit, which is available from your local hardware store. To complete this, you should firstly clean the area and check for rust. If there is rust, then use a rust converter or remover. Then you can use a small amount of epoxy resin filler according to the guidelines. Use a spreader or plastic blade to apply it to the chip and then clear off any excess straight away. The filler will take anywhere from twenty to sixty minutes to set, and as soon as it has done this, smooth it with a fine sandpaper wrapped round a block of wood. It is important to avoid scratching any of the other enamel. When you have sorted either the small or the bigger chip, you can use an appropriate enamel paint. You might have to apply a few coats, in which case, gently sand the set paint in between each application, once more taking care not to scrape any of the other enamel. If you have children living in your home, there is the possibility that over a period of time your enamel bathtub could become extensively damaged or stained. If this is the case, it’s best to get a contractor to resurface your bathtub if you haven’t done this kind of task. The contractor may finish the task onsite at your home. This is the better option as it means you do not have to take out the wall tiles and sheeting which can be costly and time consuming, particularly as you will have to put them back up once more later. Otherwise the contractor will take the bathtub away to their factory where they will resurface it.If you feel confident that you can complete it yourself, you have to mask and cover all of the adjoining surfaces and faucets. If you have dripping faucets, and you haven’t got time to fix them yourself, which is clearly preferable given the amount of water that is unnecessarily going down the drain, you will need to put plastic bags over the faucets so that the water does not drop onto the bathtub surface. Firstly, give the bathtub a light sand and then wipe the surface with a cloth that has been dampened with mineral turpentine to get rid of any residual soap or body oils.When the surface is totally dry, paint the surface, brushing up the sides from the bottom in a sweeping motion. Wipe away any wet runs straight away and work quickly to maintain a wet edge. If you are confident using a spray gun, use this with a number of light applications to produce a professional finish. Then leave the room and close the windows and doors for 24 hours to minimise as much as possible the insects and dust. Then do not use for another forty-eight hours, and even longer in cold weather, as the steam will have an affect on the paint. If you have a spa bath in your home, the best way to look after it is to frequently wash it with warm soapy water or liquid cleaner using a soft cloth. Don’t use any kind of abrasive cleaner. If you have stubborn stains, you can use a fine cutting agent or toothpaste. To clear out the residue in the jets and pipes, add some dissolved nappy soaker powder to the spa with clean water and run the spa for fifteen minutes. Then flush the jets and pipes with disinfectant to rid them of bacteria. And if you like to use fragrant oils, check them first to see if they stain the spa bath.Delimited Author Bio Resource Box Scott Rodgers has recently retired as a Los Angeles plumber and is committed to helping you keep the bathroom looking beautiful and working well. For more useful plumbing tips and information, visit Scotts website: http://eLocalPlumbers.com
Avoiding and Detecting Water Leaks in the Home
Water leaks are something you definitely want to avoid. They waste water at a time of drought. They look unattractive, cheapening the look of you home. Most importantly they cause a lot of damage to you home which can be costly to fix. The best way to fix water leaks is to avoid them in the first place, however if you already have water leaks in you home it may be time to call out a plumber.
The best way to avoid water leaks in the first place is to ensure that a good plumber does any works or repairs. A quality job from the start will lessen the probability of problems in the future, saving you money.
If you are constructing or renovating your bathroom a few easy design ideas can help prevent leaks in the future. Make sure the plumbing is of good quality. If you pay peanuts, the monkeys will come. Tiling is also important, make sure tiles are placed closely together and sealed properly. Many people have enjoyed their first shower in the new upstairs bathroom only to discover the downstairs room below has been flooded in the first place.
After you have moved into a new home, if you haven’t done so already, have a building and pest inspection done. Whether you have moved into a new or established home is irrelevant, it’s still important to get this inspection done. Doing so may reveal any leaks or other structural problems early. Addressing them now is better than paying for a heap of damage done further down the track.
If you think the leak is coming from a pipe, complete a simple test by turning off all water in the house. Make sure this includes the washing machine and any garden watering systems. If the water meter is running, it is likely you have a leak. Other leaks are harder to spot. Many people have leaks inside their roofs. If you have terracotta tiles you need to check for damage after any storms. Just a couple of broken tiles can cause leaks in your roof. Don’t ignore problems because they are small. Even minor problems like leaky taps should be fixed straight away, a dripping tap can waste up to twenty two litres of water a day.
Water leaks can damage your property in many ways. A slow leak can rot plaster, cause mold and mildew to grow and damage the home structurally. You may not even be aware of a slow leak existing. More serious leaks can cause major structural problems or flooding to your home. If you think you could be in danger of any of these problems, call an emergency plumber, or a 24 hour plumber straight away.
Water leaks are often easily fixed. New plumbing, sealant and general structural repairs are often required. If this damage is serious you may need some plaster or timber work done. It may cost a bit of money, but it’s a far better option than letting the damage to your home continue. Enlisting the help of a good, qualified plumber saves money in the long run, as well as a lot of hearth ache.
Tags: emergency plumber inner west, emergency plumber mascot, emergency plumber roseberry, emergency plumber st peters, emergency plumber zetland
Sunday, April 26th, 2009emergency plumber inner west sydney54 Comments
Posted on November 18th, 2009 | by Admin |
The moling equipment, so named because of its similarity to the creatures which tunnel away underground, is lowered into the first bore hole.
The Secret Tunnels Created By Trenchless Cable & Pipe Installation Systems
By William Penworthy
There are several trenchless cable & pipe installation systems, with their complexity, size and operation dependent upon the scale or severity of the job. Underground pipe installation equipment necessarily needs to be rugged, tough, durable and powerful. There are several such systems on the market, but which type to select will depend on whether you are looking at laying, repairing or replacing relatively small, household pipes that may well be made of a PVC based material, or larger, pipes that may be several inches in diameter, made from ductile iron, cast iron, clay, brick or concrete.
Installing a new pipe is a task which requires pinpoint accuracy, and a great deal of power. Standard pipe installations have, in the past, relied upon the opening up of a large trench. Often this has involved significant time, as well as the inconvenience of having heavy plant machinery for the work. Naturally there is much damage caused to the surface and surrounding area, and in urban environments this can prove to be an unpopular aspect of the process.
Although open trench pipe installations are time consuming and expensive, they can often be forgiven and overlooked if the work is taking place on disused or waste ground. But there is less of this available in towns and cities, and the likelihood is that any new pipe installation will require the digging up of roads, paths, driveways, car parks or gardens. In all of these cases there is likely to be either disruption, or expensive damage, and either will be unwelcome.
But with trenchless cable & pipe installation systems now doing away with the need for open trenches, much is changing. No longer does installing a pipe entail having to dig up roads or gardens, or cause traffic jams, diversions or closures. Even the time and expense of creating and repairing a trench is gone. Trenchless pipe installations mean exactly that – but how can a new pipe or cable be laid several feet underground without having to dig a hole for it? Additionally, how is it possible to identify a safe route underground, since there are so many existing cables, pipes, foundations and heavy root systems which may interfere with any planned passage?
The solution is relatively simple, although it is in its simplicity that the true success of these machines is demonstrated. In order to lay a new pipe or cable it is first necessary to construct two small bore holes. These are only slightly wider than a metre on each side, with one positioned at each end of the stretch of pipe or cable to be laid. The pipe installation equipment is then lowered into one trench, and a series of rods attached.
Using high powered hydraulic systems capable of exerting nearly forty tons of pressure, the rods are pushed through the ground. The angle and direction can be adjusted carefully, and using specialist sensing equipment it is possible to identify any nearby pipes, cables, foundations or tree roots which may interfere with the planned path. Once the underground pipe installation equipment has driven the rods through to the second bore hole, the rods are disconnected.
Pulled in behind the rods is a cable, to which is then attached a special widening tool. Behind this tool is the new pipe. The hydraulic unit then pulls the cable back through the narrow tunnel, with the widening head forcing aside the ground to create a wider path. In some case this may be up to eight inches in diameter. The exact diameter to which the tunnel walls are pushed will depend upon the size of the pipe. As the cable is pulled back through the tunnel, the pipe is laid.
All that is then required is for the pipe installation system to be lifted up out of the bore hole, and the two small holes filled in. The process of laying the cable or pipe takes a very short period of time. It is possible to lay the pipe at a rate of almost three metres per minute, so that even a stretch of cable running right across a street might take no more than five or ten minutes. Not only that, but the fact that the street could remain open only adds to the benefits offered by trenchless cable & pipe installation systems. Without doubt, underground pipe installation equipment has revolutionised the installing, replacing and repairing of cables and pipes.
A plumbing fixture that is often out of sight and therefore out of mind is the water heater. They are generally trouble-free devices, but plumbing problems can arise. A few of these can be corrected by the homeowner, but some require the service of the gas company or one of the local plumbers.
In household and business usage, most water heaters in the United States and Canada are of the tank type. Additionally referred to as storage water heaters, these include a cylindrical tank in which water is saved constantly hot and ready for use. Typical sizes for household use vary from 20 to 100 gallons. These may be heated by electricity, natural gas, propane, or other energy sources. Natural gas water heaters are most popular within the United States and most European countries, because the fuel is often conveniently piped throughout cities and at the moment is the cheapest to use. Compared to tankless water heaters, storage water heaters have the benefit of utilizing power (fuel or electrical energy) at a relatively low rate, storing the warmth for later use. Larger tanks tend to offer hot water with much less temperature fluctuation at reasonable stream rates.
On the whole, the more insulation the better, since it reduces standby heat loss. Hot water heaters are available with insulation ratings starting from R-6 to R-24. It might be economical to add an extra insulating blanket or jacket on the outside of a poorly insulated water heater to cut back heat loss. The most typical type of water heater blanket is fiberglass insulation with a vinyl film on the outside. The insulation is wrapped around the tank and the ends are taped together. It can be crucial that the blanket be the right dimension for the tank and not block air movement or drainage valves, the controls, or block airflow through the exhaust vent, if any. In very humid locations, adding insulation to an already nicely-insulated tank could cause condensation problems, probably causing rust, mildew, or operational problems. Modern water heaters have polyurethane foam (PUF) insulation. In international locations the place serviceability is essential, PUF capsules are saved between the interior tank and the outer body.
What Goes Wrong with Water Heaters?
Water heater problems usually become obvious, although if they’re in a hidden location things may get pretty bad before they are noticed. A hot water faucet fails to provide hot water. You see dripping or puddles near the water heater, or the tank emits unusual gurgling or popping sounds. Typical water heater issues embody a leaking tank, not sufficient hot water, water that is too scorching, water that is not hot enough, unusual noises within the tank, and discolored water. Many gas utility firms will make a free home visit to solve issues with a gas water heater’s burner or the gas provided to the tank. For problems with an electrical water heater it may be best to contact a qualified plumbing service. People living in North Georgia can’t do better than to call Sewer Shark Plumbing. They’ll be able to determine the problem and provide the service you need, whether it’s a replacement of the heating element, the pressure valve, make needed pipe repairs, or install a new water heater if the old one is past saving.
Leaking gas, either natural gas or propane, is very dangerous. It smells somewhat like garlic or rotten eggs, and if you smell it, shut off the pilot light, close the gasoline shutoff valve, and call a plumber or your gas utility firm for assistance.
Learn How to Flush & Drain a Water Heater
Before draining and flushing your water heater, flip off the gas or electrical power (relying on whether it is a gas or electric water heater) and let the water cool a little. Close the incoming water valve and attach a hose to the drain valve to run the water into a large bucket or to a drain or the outdoors. Open the drain valve and open one hot water faucet somewhere in the house to let in air. When all water has drained from the water heater, turn the cold water valve on and off till the water from the drain runs clear. Then shut the drain valve and the hot water faucet, open the cold water valve, and switch the heater on again.
This is also a very good time to check the temperature-stress relief valve, which keeps pressure within the boiler from getting too high. Raise or lower its handle. Water ought to drain from the overflow pipe.
Almost every homeowner will need some kind of home plumbing repair if they stay in one place long enough. There is quite a list of problems that are likely to crop up:
toilet tank repair
toilet flange repair
septic system or sewer cleaning problem
hot water heater repair needed
garbage disposal repair needed
drain cleaning needed
or other plumbing problems
In the bathroom, a clogged toilet can result from a number of causes. Trying to flush too much solid material (human waste, paper products, children’s toys, or whatever) will do the trick. Trying to flush a second time before the tank has filled will sometimes produce this result. This is often a temptation now that toilets do not hold enough water to occasionally do the job with one flush.
Bathroom toilets sometimes need work for reasons other than being clogged. Toilet tank repair may sometimes be needed when, for example, the water never stops running after a flush. This can be caused by a stuck valve or a stuck float. If water is showing up around the base of the toilet, toilet flange repair may be needed. A qualified plumber such as Sewer Shark Plumbing will have no trouble diagnosing the problem and providing a solution.
Plumbing fixtures in the kitchen sometimes need repair. Faucet leaks are probably the most common, but drain malfunctions are also possible. Leaky faucets are usually repaired by a washer and seat replacement for some kinds of faucets, and cartridge replacement usually takes care of the problem in the more modern washerless faucets. Garbage disposals can have various types of malfunctions, either plumbing related or electrical. A good plumber will be able to provide you with the garbage disposal repair you need. One other plumbing service you may need in the kitchen is the ice maker, if you have one on your refrigerator. Usually, after the initial installation they are trouble-free, but breakdowns can occur.
The laundry area may require the attention of a plumber. The washer hoses can usually be maintained by the homeowner, but the faucets and drain may need the attention of a local plumber. Water heaters sometimes fail due to age or other causes. Hot water heater repair may be needed because the heating element has burned out and needs to be replaced. Or the tank or its pipes may fail, requiring a complete replacement of the water heater.
Not all plumbing problems arise inside the house. In climates where the winter temperatures get below freezing, frozen pipes are a common occurrence. It would be a good thing to have a plumber inspect your frozen pipe protection to be sure it is adequate. Most homes have preventive measures to avoid this, such as special outdoor faucets, insulating tape around exposed pipes (in the crawl space, for example), and heating for pump houses. At my home I rigged an infrared lamp and a freezing-temperature thermostat to keep the interior of my pump house from getting too low. I also put in insulation to keep the heat inside. Well pumps also have problems not related to freezing. The pump may fail and need to be replaced.
If your house has city sewage, you are unlikely to need this type of work done. But home sewer cleaning is sometimes needed when tree roots have grown into the pipes or when flushed material has gotten stuck in the sewer pipes. A house with a septic system has more “opportunities” for plumbing problems. The same difficulties with city sewage are possible here: tree root obstruction and clogged pipes from flushed material. In addition, a septic system has two additional parts, the tank and the leaching system (or drain field, as it’s called in my part of the country), both of which can suffer from damage. Since the septic tank is just a big box, there’s not much that can go wrong with it, other than being filled with unprocessed waste that requires pumping. However, septic tanks have an inlet pipe and an outlet pipe, both of which can become clogged. The drain field or leaching system usually suffers failure as a natural result of age. When this happens, the system has to be enlarged.
An understanding of how a septic system works can help avoid unnecessary plumbing problems. The septic tank is basically a huge bacteria-growing tank… good bacteria, that is. They break down most of the natural materials that are sent their way, and the liquid overflow goes to the drain field to settle into the ground. Some materials are not broken down well by the bacteria: fats, laundry lint, and detergents. There are additives that you can flush occasionally to help the septic system perform its function.
Plumbing repairs can be costly, so it is good practice to get plumbing estimates for any job more than the simplest. Plumbing quotes from more than one plumbing service can be helpful in deciding which company to use.
When you need to find a plumber, there are a number of considerations that can help you find one that will give you the plumbing service you need. Your situation may involve the repair of older plumbing or the installation of new in, perhaps, a bathroom remodeling project.
Whether your need involves sewer cleaning, fixing frozen pipes, or something more pleasant, such as investigating tankless water heaters, you want to find a plumber who is trained and experienced in the kind of work you need done. If you live in Northeast Georgia, you can’t go wrong with Sewer Shark Plumbing. Their experienced team can tackle, as their name implies, any sewer or septic system problem. They are also a full-service plumbing company and can handle all types of plumbing repair and service, including water heaters, faucets, drain cleaning, leaks, pumps, and garbage disposals.
If you don’t live in Northeast Georgia and can’t use Sewer Shark Plumbing, you’ll have to do some more investigating. You will probably look in the Yellow Pages to find the plumbers who have decided to advertise there. But you won’t find much to help you decide between one plumbing company and another. The main difference you’ll observe is how much money each plumbing contractor decided to spend on his Yellow Pages ad!
One of the best ways to find a plumber who’ll do a good job for the right price is to know someone who has had toilet plumbing repair done, if that is also your need. So you may need to ask around your neighbors or coworkers to see who has had plumbing fixtures installed, clogged toilets fixed, or whatever plumbing repairs you’re looking at.
However you locate the plumbing contractor you’re considering, it’s a good idea to get plumbing estimates for your pipe repair job from more than one plumbing company. While it’s not necessarily a good idea to choose the least expensive plumber, having a number of plumbing quotes in hand may help you decide between two companies that seem equal in other respects. You should get a complete written breakdown of the costs of the project and the anticipated time it will take to complete the job. Do not make your decision based on price alone, although that is very tempting in these difficult economic times. It can sometimes turn out that cheaper job will be the more expensive in the long run when the kitchen remodeling or plumbing repair turns up later problems that have to be solved.
As with all professionals, at the very least you should expect a professional and courteous service. If the company that takes care of your plumbing needs doesn’t take their customer service responsibilities very seriously, it makes you wonder how good they are at making residential plumbing repairs.
Also if your plumbing contractor treats their customers simply as another meal ticket, i.e., charges huge service call rates, considers any call after 4 p.m. an “emergency” and charges accordingly, you can be sure that it is not your plumbing repair that is their priority.
How do you deal with this? You can always vote with your money. There are companies out there such as Sewer Shark Plumbing who believe in providing excellent service. They will spend time with a new customer to be sure they completely understand their problems or they will help them decide which plumbing fixtures are the best for them. They know that most customers don’t fully understand all the considerations in a good plumbing installation, and this can make it difficult to decide on which fixtures would suit their needs best.
No matter how good plumbing installations are, they can break down, sometimes because the customer hasn’t followed the instructions properly, sometimes because the unit installed was faulty, and sometimes simply due to age and usage. This can happen with any devices in the home, plumbing, electrical, or electronic. A good plumbing company such as Sewer Shark Plumbing will respond to a customer’s call in a reasonable time period and complete the plumbing repair in as quick a time as possible. They will not charge you excessive fees for doing these jobs, either.
Your residential plumbing need may be something straightforward like drain cleaning or a leaky faucet. Or it may be something more elaborate such as remodeling your whole bathroom where you are selecting and installing new fixtures such as basins, tub, shower, toilet, and the faucets that accompany them. Whatever plumbing service you need, the right plumber can make all the difference. I hope the above will help you find a plumber that will provide total satisfaction.
All About Kitchen Faucets
By Marcus Perchowski
Is it time to renew the look of your kitchen? A new kitchen faucet might
be just the accent piece to create an entirely new look to the kitchen! A
new faucet is a good starting point! Being the focal point of the sink,
it does catch the eye.
If you have the hard water ‘curse’, odds are it’s been recking havoc with
the guts of your kitchen faucet. Not to mention a continual
drip-drip-drip. In addition, hard water residue most likely stained your
fixture leaving you with an unattractive mess. Replacement time!
But what do you actually get when you pay mega dollars for a spanking new
kitchen faucet? Odds are all youre really getting is less money to
splurge on the rest of your kitchen upgrade. A prominent consumer reports
team performed in-depth testing on kitchen faucets to get the real scoop.
In a unanticipated turn of events, their evaluations discovered that despite
the marketing hype, faucet prices have little to do with
performance. In this instance, you dont always receive what you
In the world of faucets for the kitchen, its the exterior finish – not
the trade name – that at the end of the day provides enduring resilience.
Naturally, investing additional money does make available more options to
select from. So how do you go about selecting the right kitchen
faucet? Especially when prices range from $50 all the way to $600 or
more! Lets investigate what to keep an eye out for.
For starters, lifetime warranties that cover leaks and stains is about
customary in the faucet trade. Thanks to technology, most perform the
mission of delivering water exceptionally well. Barring the budget
priced faucets sold, todays kitchen fixtures are manufactured with superior
valves and hardier finishes. So performance is not really the true test –
they all perform reasonably well. What is worthy of paying attention to
is what happens to the faucet with daily use. Just how does it stand up
to scratches, stains, bumps and bruises?
What the consumer group decided to do was perform their evaluations on the
faucet’s finish and not the make of the product. In the final analysis,
this is what youre interested in when buying a kitchen sink faucet.
Here’s a little chemistry 101. Faucet exteriors are battered with charged
metal atoms. These metal atoms chemically bond to the surface of the base
metal in a procedure called physical vapor deposition, or PVD. The issue
is that various metals affect different finishes. Even nickel and
bronze. The evaluation team revealed that faucets with PVD finishes held
their own despite earnest attempts to scratch and mar them. PVD finishes
are not bullet-proof however and strong corrosives (i.e. drain cleaner) can
lightly blemish them.
A chrome plated faucet is common in many kitchens today. Chrome is pretty
durable but can be marred with an abrasive scouring pad. If you prefer
the look of chrome, use caution when cleaning your faucet.
Also tested were the single-handled faucets which are a very popular design.
These models combine spray head and spout for further usefulness and
flexibility. But the test findings are applicable to other faucets designs as
Bronze offers a distinguished look to the kitchen sink and a good option if
youre not into shiny fixtures. Selecting the correctly treated bronze is
important though. Tests proved that a faucet with PVD finish withstood
abrasion tests but the bronze without the PVD finish did not.
When youre contemplating an upgrade to your kitchen, a new faucet will provide
a whole new look to the sink and the total kitchen. Kitchen sink faucets
are relatively inexpensive (compared to other items in a kitchen
remodel!) and offer a distinct look youll enjoy for years.
About the Author: A kitchensinkfaucetsshop.com/delta-kitchen-faucet/”>Delta
kitchen faucet can be found in homes around the world. Learn more about
Delta and kitchensinkfaucetsshop.com/”>kitchen sink faucets at
It may be a clogged vent or a clogged drain, both will produce the same condition that permits sewer gas to come into your house. When you smell those off sewer smells.
San Francisco Plumbers fix these types of plumbing issues all of the time.
We are repeatedly removing leaves, birds’ nests and squirrels’ stashes from vent pipes.
« Trenchless Sewer Replacement – Plumbers Use Trenchless Sewer Technology to Repair Leaking PipesMemorize The above-mentioned Things With the Dallas Plumber You Are Hiring »
April 28th, 2009
From time to time removing a radiator is a mandatory task that many folk would only trust to a plumber. For straightforward upkeep or to aid decorating, the removal of a radiator does not have to be a consultant job and can be simply carried out by the householder. Having said that, if you doubt your DIY abilities then leave well alone, except for people that have a fair experience of how their heating system works, the job can be done without too much fuss or mess.
Before beginning any kind of work on radiators it’s best to spend a little time familiarizing yourself with the system and making certain you’ve got an understanding of where assorted shut off valves are found. It is also helpful to equip yourself with all the likely tools, fittings, materials etc, to complete the job.
Do not over tighten and remain mindful of roughly how many turns it takes to close it.
It should now be feasible to lift the radiator from the wall brackets, which in turn may also be removed. This now clears the space for other kinds of repairs or decorating etc. If the wall is to be papered it’s a smart idea to replace the wall bracket screws in order to mark their location.
Refitting the radiator is usually a reversal of the removal procedure. With the connections correctly made slowly open the lock shield valve by the same number of turns it took to shut. With the bleed valve open air should be pushed out of the radiator and replaced with water from the central heating system. Once bubbles of water emerge from the bleed valve close it off. If no leaks can be seen, running the central heating will push water round the system. Practically it’s good to check the remainder of the radiators in the house for cold spots and bleed any air as could be needed.
If the radiator is to be replaced with a new one the compatibility of valves and radiator need to be checked. If the new radiator is supplied without valves it could be feasible to remove and install the old valves from the previous radiator. Treads should be cleaned and installed after binding with PTFE tape. Wall brackets could also need moving or replacing if the new radiator is a different design to the old one.Share and Enjoy:
Trenchless sewer repairs are the newest technology from the sector of plumbing. I can remember many years ago having a burst pipe at my home. When the plumbers arrived they told my parents that they would need tear up the complete front yard, as well as our drive. I was in high school then, and I will never forget the look on my mum’s face as she looked over to her rose garden. She had spent so much time getting it just the way she wanted it, and now it was all going to get destroyed.
Things are totally different now. If you have a burst pipe, or if your pipes are leaking, you now can opt to have a trenchless sewer system installed instead.
First the plumbers dig what’s called an insertion and retrieval pit. Then the trenchless bursting head is inserted into the old sewer pipe. A heavy cable is now pushed through the pipe from the retrieval pit. Approximately every twenty feet the plumbers fuse the pipe together. This new pipe is highly immune to leaks and root intrusion, so it has a long life expectancy.
This is am dazzling new technology that is now available. When you are faced with a damaged or burst pipe, you may possibly wish to find out more about trenchless sewer replacement.